About us

Intersel Engineering Services was established in 1986 by Guity Shokri and had grown into the leading repair specialist for all rotating electrical equipment in the Gulf Region. After partnering with Sulzer Rotating Electrical Equipment Services and Sulzer Turbo Services in 2008, the name was changed to Intersel Dowding and Mills FZCO, and we are now able to provide access to the best globally available rotating electrical equipment repair service facilities. Comprehensive group services include supply and repair of all Electrical Rotating Equipment, Steam Turbines, Compressors and Pumps.

With our experienced, competent staff, and large, well equipped workshop facility in Jebel Ali Free Zone, Dubai, no overhaul or rewind job, whether a low power, low voltage motor or a 40KVA, 13.8KV Brush turbo-generator, is beyond our capability. We operate in many different industries, from power generation and water desalination to food and beverage production, and we are specialists in the oil and gas industry, where we repair GE 752 and EMD D79 DC motors, primary power alternators and Elmagco Eddy Current brakes. To help our oil and gas customers meet the stringent safety standards now required of them, we have developed a system for GE752 DC motors allowing third party certification to ATEX (IP15) compliance, which makes them safe for use in Zone 1 and 2, potentially hazardous environments.

Through our prestigious Authorized Overhaul Service Shop agreement with Toshiba, Mitsubishi – Electric Industrial Systems Corporation (TMEIC), and our memberships with the Electrical Apparatus Service Association (AESA), Inc., the Association of Electrical and Mechanical Trades (AEMT) and the International Association of Drilling Contractors (IADC), we have access to some of the world’s finest motor design engineers and technical information.

Intersel Dowding and Mills
Repair and overhaul services in Dubai

Why our customers work with us

Comprehensive service offering
Intersel Dowding & Mills provides comprehensive repair, refurbishment, and maintenance of rotating equipment in the Middle East. We offer field service, shop-based repair, engineering services, coatings, maintenance agreements, dynamic balancing, and general machining services. Also, we manufacture new parts for gas and steam turbines, generators and motors, compressors, hot gas expanders, fans and blowers, draglines, traction motors and other ancillary equipment.

Global presence

Intersel Dowding & Mills provides Middle East reach with high-quality local service. Our regional facilities are fully equipped and our field service crews are extensively trained to provide assistance around the clock in order to meet our customers’ requirements.
As the leading independent provider of repair services, Sulzer can offer reliable, effective and efficient solutions to challenges of any brand of rotating equipment.

Electro-Mechanical Services
With a full range of services for electrical rotating equipment from inspection to complete rotor and stator rewinds, as well as remanufacturing, Intersel Dowding and Mills makes sure your equipment runs reliably. Rapid response and prompt turnarounds are our key strengths.
Mechanical Services
We offer a full range of mechanical services and capabilities, from machining and turning to metal recovery and super finish grinding. When a breakdown occurs, we provide on-site services 24/7 in order to reduce downtime.
Field Services 
Our dedicated field service teams are at your site whenever you need us, working for you around the clock. Intersel Dowding and Mills workshop and engineers provide support for the field service teams. We are dedicated to ensuring fast turnarounds and high-quality field service.
Service Solution
Your operations need to run reliably and flexibly. Solutions to improve these key factors are developed together with you and based on experience and expertise.

Workshop Facility

  • 2 x 10t Demag overhead Cranes
    Millitorr Eng. Ltd., Vacuum Pressure Impregnation Tank, 1700 mm diameter and 2000 mm depth
    Schenck Avery Dynamic Balancing Machine (Rotors up-to 2.1m in diameter, 6m in length, 11t in weight and balancing speed range of 210 – 1680 rpm)
    2 x Baking Ovens – large oven internal dimensions 1830mm x 1780mm
    Phenix Technologies, MTS1250R-1000 High Power Motor Test Panel
    Phenix Technologies, MTS200R-150 Medium Power Motor Test Panel
    PJ Electronics Surge / High Pot Test Set – capacity 50 kV
    Hipotronics DC Insulation Tester – capacity – 0 to 80 kV
    T & R Equipment Ltd. Flash Tester
    North Star High Voltage, High Voltage Probe
    Fluke Combi-Scope
    3 x Lathes for basic machining facility
    Baker Surge Tester AWAIV 12 12 KV (Portable)
    Flir P620 Thermographic Camera
    On-Site Balancing Equipment
    Commtest VB8 Vibration Analysis Equipment
    Laser Alignment Equipment

Quality Assurance and Health & Safety

Intersel Dowding & Mills is committed to assuring quality and safety in the design, engineering, installation, commissioning and management skills which it offers to its clients. We strive to be best in class and in safety.

Safety excellence is a key pillar of our business success which we strive to achieve by continually demonstrating an eagerness to challenge, to learn, to stay lean, and to do the right thing, the right way.

Intersel Dowding & Mills maintains internationally recognised BSI accreditations for quality, environmental and health and safety.

Intersel Dowding & Mills is a member of the Association of Electrical & Mechanical Trades (AEMT) and the Electrical Apparatus Service Association (EASA). We are capable of repairing and overhauling rotating machines operating in explosive atmospheres.

Intersel Dowding & Mills safety systems are managed using our Integrated Management System, Entropy.

Please refer to Appendix 3 for further details, should you require additional information or copies of specific accreditations please do not hesitate to contact us.

Intersel Careers

Intersel Dowding & Mills offers a wide range of employment opportunities across rotating equipment maintenance industries. We are looking to add competitive and talented individuals to join our team and make the difference. If you are highly motivated, goal oriented and looking for a challenging career then apply for our open positions below and get included in our talent hunt!

Current Openings

Field Service Manager Rotating Equipment

Job description Development of maintenance strategies for rotating equipment maintenance. Rotating equipment performance monitoring. Participation in root cause failure analysis and bad actor elimination program. Plant turnaround and major shutdown involvement. Technical/Engineering Standards and best practice management. Warehouse and spare part strategy development. Workflow processes, procedures and systems development.

Intersel FZE


Our dedicated team of specialists respond on 24/7 basis. We strive to uphold highest quality standards in industry.


We are a leader in the development and application of new repair technologies and solutions that meet our customers’ needs.


Technology builds the back drop of our activities. All of our service solutions are technically sound and reliable.


We provide better value for service budgets by maximizing repair opportunities and minimizing spare parts replacements.

Our Dedicated Team

Keith Grundy

General Manager

James Harris-Dewey

Operations Manager

Frank Mair

Business Development Manager

Rajeevan Chembeth

Electrical Manager

Manoharan Sellakanu

Mechanical Manager

Bahar Khodaei

Sales Engineer

Mohammad Ashraf

Senior Accountant

Jay Musa

Chief Accountant

Selvan Manicka

Sales Manager

July Acay

Electrical Supervisor

Mehboob Ali

Logistics Coordinator

Rajesh Balan

Mechanical Supervisor

Mohamad Hamid

Public Relations Officer

Dianne Perez


Elaine Turla



Cutting-edge maintenance and service solutions since 1986

Contact Us